Drawing for HORMANN

USPTO serial 76043547

HORMANN

Reviewed by CopyMark Law Group

Reg. 2824280Status 800Registered
Filing date
Status date
Registration date
Mar 23, 2004
Examiner
BRACEY, KAREN
Law office
PUBLICATION AND ISSUE SECTION

What this means

Status 800 means the registration was renewed after acceptable combined Section 8 and Section 9 filings. The mark remains registered for another 10-year term with active federal protection. Calendar the next Section 8 and 9 deadline in 10 years and maintain monitoring.

Status 800: Status 800 means the registration was renewed after acceptable combined Section 8 and Section 9 filings. The mark remains registered for another 10-year term with active federal protection.

Need help with HORMANN?

If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.

Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.

Owner

Attorney of record

The USPTO lists this attorney as the applicant's representative for correspondence on this application.

Thilo C. Agthe

Thilo C. Agthe Wuersch & Gering LLP100 Wall Street, 10th FloorNew York, NY 10005United States

Goods and services

ClassDescriptionStatusFirst use
006[ Windows, ] doors and gates and garage doors made of metal or mainly of metal; metal locks; window, door and gate cases as well as profiles for the manufacturing thereof, [ all primarily made of metal; door and gate leaves, fillings for door and gate panels, ] all being made of metal or mainly of metal; Building materials of metal or mainly of metal namely movable and stationary closures in the nature of gates, doors, cases, partitions, partition walls; [ Prefabricated buildings of metal or mainly of metal; Non-electric cables and wires of metal or mainly of metal, for use as parts or accessories of movable and stationary closures and partial closures of constructions, buildings and properties or enclosures; Fittings of metal or mainly of metal for buildings, namely, cotter pins and clips; cladding panels of metal or mainly of metal; ] springs of metal or mainly of metal as accessories or parts of movable and stationary closures of buildings and properties or enclosures; [ Windows of metal or mainly of metal, namely of aluminum and steel as well as their structural and replacement parts; strap-hinges of metal or mainly of metal for windows; ironwork of metal or mainly of metal for windows; window stops of metal or mainly of metal; window handles of metal or mainly of metal; shutters of metal or mainly of metal; window frames of metal or mainly of metal; window casement bolts of metal or mainly of metal; metal window pulleys; window cases of metal or mainly of metal; Fire protection grilles and closures against fire of metal or mainly of metal for building purposes as well as closures against smoke of metal or mainly of metal for building purposes; glazing frames of metal or mainly of metal for buildings and structural and replacement parts thereof; cornices of metal or mainly of metal, namely, window cornices and structural and replacement parts thereof; gratings and grilles of metal or mainly of metal and parts thereof, namely, roller gratings and roller grilles and structural and replacement parts thereof; house numbers of metal or mainly of metal, not luminous; jalousies of metal or mainly of metal; wall linings of metal or mainly of metal; metal frames for building purposes; ] panels of metal or mainly of metal for doors and gates; [ profiled rods and profiled strips of metal or mainly of metal, namely used for building purposes; casement windows of metal or mainly of metal; ] bolts of metal or mainly of metal; [ shutters and roller blinds of metal or mainly of metal; ] screws and nuts of metal or mainly of metal, as accessories and parts of movable and stationary closures of buildings and properties or enclosures; [ pre-fabricated steel and aluminum buildings and other prefabricated buildings of metal or mainly of metal as well as the structural and replacement parts thereof, window, door and gate lintels of metal or mainly of metal; wainscotting of metal or mainly of metal; ] Gates of metal or mainly of metal, namely of steel or galvanized steel, special steel, aluminum, namely, garage gates, hand-operated gates [ , non-electric motor-driven and remotely controlled gates, industrial gates, gates for enclosures, sectional gates, single-wing overhead gates, tip-up gates, rolling gates, sliding gates, revolving gates, concertina gates, circular gates, swinging gates, fire protection gates and fire protection sliding gates, courtyard entrance gates and structural and replacement parts thereof; gate wings of metal or mainly of metal; gate frames of metal or mainly of metal; gate strap-hinges of metal or mainly of metal; gate handles of metal or mainly of metal ] ; gate panels of metal or mainly of metal; [ metal latch bars; non-electric metal gate openers; metal latches; metal runners and rolls for gates; metal non-electric gate locks; metal non-electric gate closers; metal by pass doors as accessories or parts of gates; metal gate enclosures; partition walls of metal or mainly of metal; Doors of metal or mainly of metal, namely, house doors, internal doors, external doors; sound proofing doors, safety doors, multipurpose doors, fire and smoke protection doors, manually operated doors, non-electric motor-driven doors, revolving doors, sliding doors, doors for enclosures, garden doors and concertina doors and structural and replacement parts thereof; door strap-hinges of metal or mainly of metal; door stop of metal; door panels of metal or mainly of metal; door wings of metal or mainly of metal; door handles of metal or mainly of metal; metal non- electric door bells; metal latch bars; metal door knockers; metal non-electric door openers; door frames of metal or mainly of metal; metal door bolts; metal runners for sliding doors; metal non-electric door locks; metal non-electric door closers; building elements, namely, side parts in the nature of side panels and side lights of metal or mainly of metal for house doors and building entrances; wall linings metal or mainly of metal; brackets of metal or mainly of metal for building purposes; fences of metal or mainly of metal; frames of metal or mainly of metal for building purposes; ] metal springs; metal replacement parts for all the aforementioned goods [ ; Building materials, namely balcony and terrace closures of metal or mainly of metal and replacement parts therefore; fire and smoke protection doors, fire and smoke protection gates and fire and smoke protection butterfly dampers made of metal; metal pipe couplings and joints ]ACTIVE—
007Electric motors for machines and structural and replacement parts therefore; clutches for machines; machines for the generation and transmission of driving power to doors, gates and movable closures of buildings and enclosures; [ engines used to operate movable closures of constructions, buildings and enclosures, namely doors, gates, windows, roller gratings, shutters; transmission chains and belts for machines; transmission shafts and driving shafts for machines; electric motors for operating door and gate driving apparatus; drive belts for machines; engine cases for machines and motors; gearboxes, gears and transmissions for machines; power operated curtain drawing units; ] power operated door driving mechanism; power operated gate driving mechanism for use with garage and industrial gates, and gate enclosures, swinging and sectional gates, revolving gates and sliding gates; shaft driving mechanism for power operated gates; power operated drive mechanism for swing gates, rolling gates, and high-speed gates; couplings for machines; structural and replacement parts for all the aforesaidACTIVE—
009[Electric motor-driven and remotely controlled gates, namely, industrial gates, gates for enclosures, sectional gates, single-wing overhead gates, tip-up gates, rolling gates, sliding gates, revolving gates, concertina gates, circular gates, swinging gates, fire protection gates and fire protection sliding gates, courtyard entrance gates; electric gate locks; electric gate closers; electric motor-driven doors, namely, revolving doors, sliding doors, doors for enclosures, garden doors and concertina doors; electric door openers; electric door locks; electric door closers; measuring signal, and controlling apparatus and instruments, namely, door control units, gate control units, motor control units, door and gate positioning systems, door and gate contacts, door, gate and window position sensors, access controls, light barriers; devices for recording, transmitting and reproducing data and signals, namely, radio receiver modules, transmitters, photocells, receivers, transponders, data carriers, data processing units as parts or accessories of gate or door systems; electric door bells; electric and electronic door openers; electric and electronic gate openers; electric and electronic door closers; electric and electronic gate closers; electric door, gate and window operating unit; controls, controlling devices, regulating devices, remote controls and remote controlling devices, checking devices, measuring and signal devices, namely, control units and displays for driving apparatus, particularly for driving devices of doors, gates or other closures of buildings, enclosures, entrances and exits and entrance ways and exit ways; controls, controlling devices, regulating devices, remote controls, checking devices and measuring devices and signal devices, namely, control units and access controls and displays for closing systems and locks; electric and electronic encoding and decoding units; electronic detectors and sensors for monitoring, controlling and regulating the movement of windows, gates or doors; transmitters and receivers for the remote control operation of doors, gates or similar movable closures of buildings and enclosures; push buttons for electric door bells; electric door bells; electric switches; luminous signs; electric and electronic locks; electric or electronic coin-operated gates and coin-operated closures of entrances and exits or entrance ways and exit ways; luminous and mechanical signal processors and signal lamps, particularly as accessories for closure of entrances and exits or of entrance ways and exit ways; electric buzzers; electronic keyboards for operating electric and electronic locks and safeguarded door and gate driving units; electric key buttons and key switches; magnified peepholes for doors; electric push buttons in the nature of switches; electric key buttons in the nature of switches and electric switch columns for the operation of movable closures of buildings and enclosures of entrance ways and exit ways or entrances and exits and for the operation of electric installations, namely, lighting of courtyards, entrances or garages; remote control hand-held transmitters for operating gate driving units; electrically operated automated fire and smoke protection doors, fire and smoke protection gates and fire and smoke protection butterfly dampers; electric door and gate locks; and structural and replacement parts for all the aforesaid goods]SECTION 8 - CANCELLED—
019Doors and gates and garage doors of non-metal or mainly of non-metal; and their structural and replacement parts; [ prefabricated non-metal buildings; non-metal building materials, namely, roofs not or mainly not of metal; non-metal canopy roofs for houses and entrance doors; rails and corner rails not or mainly not of metal used as parts of moveable closures of buildings, properties, or enclosures; cladding panels not or mainly not of metal; Windows not of metal or mainly non-metal; and their structural and replacement parts; shutters of non-metal or mainly non-metal; window frames of non-metal or mainly non-metal; non-metal window pulleys; window cases of non-metal or mainly of non-metal; Fire protection grilles and closures against fire of non-metal or mainly of non-metal for building purposes as well as closures against smoke of non-metal or mainly of non-metal for building purposes; cornices of non-metal or mainly of non-metal, namely, window cornices and structural and replacement parts thereof; gratings of non-metal or mainly of non-metal and parts thereof, namely, roller gratings and structural and replacement parts thereof; house numbers of non-metal or mainly of non-metal, not luminous; jalousies of non-metal or mainly of non-metal and not textile material; wall linings of non-metal or mainly of non-metal; non-metal frames for building purposes; ] panels of non-metal or mainly of non-metal for doors and gates; [ profiled rods and profiled strips of non-metal or mainly of non-metal, namely used for building purposes; window shutters not of metal or mainly of non-metal and not of textile material; pillars not of metal or mainly of non-metal for building purposes; casement windows of non-metal or mainly of non-metal; window door and gate lintels of non-metal or mainly of non-metal; wainscotting of non-metal or mainly of non-metal; ] Gates of non-metal or mainly of non-metal, namely, garage gates, hand-operated gates, non-electric motor-driven and remotely controlled gates, industrial gates, gates for enclosures, sectional gates, single-wing overhead gates, tip-up gates, rolling gates [ , sliding gates, revolving gates, concertina gates, circular gates, swinging gates, fire protection gates and fire protection sliding gates, courtyard entrance gates and structural and replacement parts thereof; gate wings of non-metal or mainly of non-metal; gate frames of non-metal or mainly of non-metal ] ; gate panels of non-metal or mainly of non-metal [ ; non-metal or mainly non-metal by-pass doors for gates; non-metal or mainly non-metal gate enclosures; partition walls of non-metal or mainly of non-metal; Doors of non-metal or mainly of non-metal, namely, house doors, internal doors, external doors; sound proofing doors, safety doors, multipurpose doors, fire and smoke protection doors, manually operated doors, non-electric motor-driven doors, revolving doors, sliding doors, doors for enclosures, garden doors and concertina doors and structural and replacement parts thereof; door panels of non-metal or mainly of non-metal; door wings of non-metal or mainly of non-metal; building elements, mainly side parts in the nature of sidepanels and sidelights of non-metal or mainly of non-metal for house doors and building entrances; glazing frames of non-metal or mainly of non-metal; wall linings of non-metal or mainly of non-metal; fences of non-metal or mainly of non-metal; frames of non-metal or mainly of non-metal for building purposes; Building materials, namely balcony and terrace closures of non-metal or mainly non-metal and replacement parts therefore; safety glass; window glass other than for land vehicles; window panes for buildings; wood veneers; furrings of wood and wood profiles as well as plastic profiles for building purposes; glass glazing for buildings; insulating glass for building purposes; fire and smoke protection doors, fire and smoke protection gates and fire and smoke protection butterfly dampers made of non-metal or mainly of non-metal; and structural and replacement parts for all the aforementioned goods ]ACTIVE—
037[Construction, installation, maintenance and repair of gates, their related parts and accessories and operating units therefore and for frames; installation, maintenance and repair of windows and doors, their related parts and accessories and operating units]SECTION 8 - CANCELLED—

Related trademarks

CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.

Prosecution history

DateCodeEventWhat it means
Jul 30, 2024NA89NOTICE OF ACCEPTANCE OF SEC. 8 & 9 - E-MAILED—
Jul 30, 2024RNL2REGISTERED AND RENEWED (SECOND RENEWAL - 10 YRS)The trademark registration was renewed for another 10-year term after acceptable maintenance filings. RNL1, RNL2, and RNL3 indicate which renewal cycle (first, second, or third 10-year term) was recorded. The registration remains active.
Jul 30, 202489AGREGISTERED - SEC. 8 (10-YR) ACCEPTED/SEC. 9 GRANTEDThe USPTO accepted your combined Section 8 declaration and Section 9 renewal application. The registration is renewed for another 10-year term. The next combined maintenance filing will be due at the following 10-year anniversary.
Jun 24, 2024APRECASE ASSIGNED TO POST REGISTRATION PARALEGAL—
Mar 25, 2024E89RTEAS SECTION 8 & 9 RECEIVED—
Mar 23, 2023REM2COURTESY REMINDER - SEC. 8 (10-YR)/SEC. 9 E-MAILED—
Apr 4, 2014NAS8NOTICE OF ACCEPTANCE OF SEC. 8 - E-MAILED—
Apr 4, 2014RNL1REGISTERED AND RENEWED (FIRST RENEWAL - 10 YRS)The trademark registration was renewed for another 10-year term after acceptable maintenance filings. RNL1, RNL2, and RNL3 indicate which renewal cycle (first, second, or third 10-year term) was recorded. The registration remains active.
Apr 4, 20149G8PREGISTERED - SEC. 9 GRANTED/CHECK RECORD FOR SEC. 8—
Apr 4, 20148PRTREGISTERED - PARTIAL SEC. 8 (10-YR) ACCEPTED—
Apr 4, 2014APRECASE ASSIGNED TO POST REGISTRATION PARALEGAL—
Mar 20, 201489AFREGISTERED - COMBINED SECTION 8 (10-YR) & SEC. 9 FILED—
Mar 20, 2014E89RTEAS SECTION 8 & 9 RECEIVED—
Dec 22, 2009C15AREGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK.—
Dec 21, 2009APRECASE ASSIGNED TO POST REGISTRATION PARALEGAL—
Dec 11, 2009E815TEAS SECTION 8 & 15 RECEIVED—
Jun 5, 2007CFITCASE FILE IN TICRS—
Mar 23, 2004R.PRREGISTERED-PRINCIPAL REGISTERYour trademark is registered on the Principal Register — the strongest form of federal trademark protection. You may use the ® symbol for the covered goods and services. Maintenance filings (Section 8 and renewals) are required to keep the registration alive.
Dec 30, 2003PUBOPUBLISHED FOR OPPOSITIONYour mark was published in the USPTO Official Gazette for a 30-day opposition window. During that period, third parties who believe they would be harmed can file an opposition. If no opposition is filed, prosecution usually continues toward registration or a Notice of Allowance.
Dec 10, 2003NPUBNOTICE OF PUBLICATION—
Nov 5, 2003CNSAAPPROVED FOR PUB - PRINCIPAL REGISTER—
Oct 31, 2003CNEAEXAMINERS AMENDMENT MAILED—
Aug 15, 2003ZZZXPREVIOUS ALLOWANCE COUNT WITHDRAWN—
May 15, 2003CNSAAPPROVED FOR PUB - PRINCIPAL REGISTER—
Mar 28, 20031.ADSEC. 1(A) CLAIM DELETED—
Mar 28, 2003CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Mar 28, 2003MAILPAPER RECEIVED—
Dec 17, 2002CNFRFINAL REFUSAL MAILEDA final Office Action (final refusal) means the examining attorney is maintaining at least one refusal and your options are narrower. You can file a response addressing the refusal, appeal to the Trademark Trial and Appeal Board, or let the application abandon.
Jun 14, 2002CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Jun 14, 2002MAILPAPER RECEIVED—
Apr 3, 2002CNRTNON-FINAL ACTION MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Mar 29, 2002DOCKASSIGNED TO EXAMINER—
Jan 19, 2001CNRTNON-FINAL ACTION MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Dec 4, 2000DOCKASSIGNED TO EXAMINER—
Nov 24, 2000DOCKASSIGNED TO EXAMINER—
Jul 19, 2000CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—

Frequently asked questions

Related guidance