USPTO serial 77130969
IMECA LUMBER & HARDWARE
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- —
- Examiner
- CARTY, GEORGIA
- Law office
- LAW OFFICE 117 - EXAMINING ATTORNEY ASSIGNED
What this means
These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.
Need help with IMECA LUMBER & HARDWARE?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Owner
Attorney of record
The USPTO lists this attorney as the applicant's representative for correspondence on this application.
lee levenson
LEE LEVENSON GREENSPOON MARDER100 WEST CYPRESS CREEK RD #700FT. LAUDERDALE, FL 33139UNITED STATESGoods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 001 | Adhesive materials for the building industry and tiles; Adhesives for ceramic coating and ornamental paving; Adhesives for floor, ceiling and wall tiles; Industrial adhesives for use in coating and sealing; Silicone resins for use in the manufacture of personal care and cosmetic compositions; Water treatment chemicals for use in swimming pools and spas; Waterproofing chemical compositions for articles of masonry, wood and other building and/or construction surfaces | ACTIVE | — |
| 002 | Clear and pigmented coatings used in the nature of paint; Colorants, paints and dyes for general industrial use; Elastomeric-based coatings for use on roofs, walls and building foundations; Paints for building and finishing and decorating; Precious metals in foil or powder form for painters, decorators, printers and artists; Preservative coatings for insulation, drywall, and masonry; Preservative coatings for paper and wood surfaces; Raw natural resins for use in the manufacture of resins and for general industrial use; Tints for architectural paints and pigmented coatings for interior and exterior use; Vitreous enamel for industrial chemical tanks and piping; Wood preservatives for fences and other construction purposes | ACTIVE | — |
| 006 | Buckles of common metal; Building materials, namely, in-wall trash and recycleable containment system sold as a unit, namely, in-wall metal trash chute device for mounting and spring-loaded chute doors; Door hardware, namely keys and key cylinders; Fasteners, namely, metal bars and chains; Gate hardware, namely, metal gate latches; Irons and steels; Lead and its alloys; Metal audio, video and computer wall and ceiling mounts; Metal bathroom hardware, namely, pulls; Metal brackets for use in the construction and assembly of decking; Metal cladding for construction and building; Metal clasps for building and repairing; Metal connectors for decking and decking joists; Metal containers for the storage and transportation of goods; Metal expansion joints for floors and walls; Metal expansion joints for piping and ducting; Metal gate hooks and eyes; Metal gates and fences; Metal gates and fencing; Metal gates and fencing panels; Metal hardware namely, pulleys; Metal hardware, namely springs; Metal hardware, namely, nuts; Metal hardware, namely, washers; Metal locks and keys therefor; Metal marine hardware, namely, thimbles; Metal nameplates and door nameplates; Metal pipe couplings and joints; Metal pipes and fittings therefor; Metal pipes for liquid and gas transfer; Metal pulleys, springs and valves; Metal rings and chains for keys; Metal rods for brazing and welding; Metal roof vents for building and repairing and modifying in residential and commercial buildings; Metal stepladders and ladders; Metal vent covers for roof deck protrusions, drains and pitch pans; Rivets, cramps and nails of metal; Small items of metal hardware, namely, high security locks and sheet metal plates primarily for the casino and gaming industry; Steel pipes and tubes | ACTIVE | — |
| 007 | Lumbering band saws | ACTIVE | — |
| 019 | Lumber; Non-metal cladding for construction and building; Non-metal decorative moldings and decorative trim for use in building construction; Non-metal expansion joints for floors and walls; Rock materials used in the manufacture of flooring, roofing, countertops, walls, cladding and fireplaces; Stone for building and construction; Structural and architectural members formed of pressed wood fibers; Tar and pitch | ACTIVE | — |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
- Other trademarks owned by tmc import and export company, llc
- Other trademarks in Class 001
- Other trademarks in Class 002
- Other trademarks in Class 006
- Other trademarks in Class 007
- Other trademarks in Class 019
- Similar marks named IMECA LUMBER & HARDWARE
- Prosecution event MAB2 explained
- Recently changed USPTO trademarks
- Recently filed trademarks
- Browse all trademark records
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Feb 27, 2008 | MAB2 | ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Feb 26, 2008 | ABN2 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Jun 28, 2007 | CNRT | NON-FINAL ACTION MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jun 27, 2007 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jun 25, 2007 | DOCK | ASSIGNED TO EXAMINER | — |
| Mar 20, 2007 | MDSM | NOTICE OF DESIGN SEARCH CODE MAILED | — |
| Mar 19, 2007 | NWAP | NEW APPLICATION ENTERED | — |