Drawing for METAL TEXTILES

USPTO serial 77615587

METAL TEXTILES

Reviewed by CopyMark Law Group

Reg. 4075623Status 800Registered
Filing date
Status date
Registration date
Dec 27, 2011
Examiner
CHARLON, BARNEY
Law office
TMEG LAW OFFICE 104

What this means

Status 800 means the registration was renewed after acceptable combined Section 8 and Section 9 filings. The mark remains registered for another 10-year term with active federal protection. Calendar the next Section 8 and 9 deadline in 10 years and maintain monitoring.

Status 800: Status 800 means the registration was renewed after acceptable combined Section 8 and Section 9 filings. The mark remains registered for another 10-year term with active federal protection.

Need help with METAL TEXTILES?

If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.

Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.

Owner

Attorney of record

The USPTO lists this attorney as the applicant's representative for correspondence on this application.

Neil M. Zipkin

Neil M. Zipkin Amster, Rothstein & Ebenstein LLP90 PARK AVENUENEW YORK, NY 10016UNITED STATES

Goods and services

ClassDescriptionStatusFirst use
001[ Automotive, truck, marine and commercial and recreational vehicle products, namely, catalytic agents for converting exhaust ]SECTION 8 - CANCELLEDOct 1, 2008
006Knitted wire mesh; metallic fabrics, namely, fabrics used for shielding electromagnetic interference (EMI) and radio frequency interference (RFI), crimped wire mesh; expanded metal foil and expanded metal frameworks used in the manufacture of filters, sleeves and separators used in internal combustion engine vehicle systems, passive restraint systems, and commercial building HVAC systems; expanded metal foils used as heat shield isolators; crimped wire mesh; oriented wire mesh; perforated metal, namely, metal spiral wound gaskets used for sealing flange joints, metallic foils wound in a spiral and used as metal gasket rings for use in automotive, truck, marine and recreational vehicles; metal seals made of knitted wire mesh for sealing housings; knitted wire mesh rope, knitted wire mesh seals, knitted wire mesh tubes, knitted wire mesh hardware springs, [ metal mesh chimneys, ] aviary of metal mesh, copper gauze; knitted wire mesh used in connection with general industrial products; [ spring fingers, namely, flexible metal EMI/RFI shielding gaskets; ] automotive, truck, marine and commercial and recreational vehicle products, namely, knitted wire mesh exhaust seals, knitted wire mesh exhaust gaskets; catalytic converter support wire mesh; catalytic converter end metal seals; metallic ring gaskets; metal spiral wound gasket used for sealing flange joints; knitted wire mesh seals and gaskets used in exhaust systems; knitted wire mesh ropes and seals used in irregular openings. process equipment products, namely, knitted wire mesh supplied in rolls for other manufactures to process into finished insulation blankets for HVAC smokestack and steam pipes; electromagnetic interference (EMI) and radio frequency interference (RFI) shielding products, namely, oriented wire gaskets; EMI/RFI shielded windows, namely, metal windows used for shielding EMI and RFI; EMI / RFI shielding vents, namely, metal ventilating ducts for shielding EMI-FRI; metal connector gaskets, namely, gaskets used around the various connectors in electronic components to maintain conductivity between the connector and the housing; electrostatic shielding products, namely, metal windows which incorporate a function of shielding electrostatic discharge in or out of a particular environment; copper gauze, namely, knitted copper wire mesh for use in the cleaning of extruder mechanisms on plastic injection molding machines; electromagnetic interference (EMI) and radio frequency interference (RFI) shielding products, namely, electrically conductive knitted wire mesh gaskets; [ metal pre-fabricated EMI/RFI shielded rooms, namely, complete fabricated rooms used in the medical, healthcare, power generation industry, as well a rooms for use in military and intelligence operations, which provide an environment free from the effects of external EMI/RFI, and an environment which does not emit EMI/RFI outside of the room ]ACTIVEOct 1, 2008
007automotive, truck, marine, train and recreational vehicle products, namely, coalescing filters for use in removing liquid from the compressed air in vehicle air operated braking systems; Automotive, truck, marine and commercial and recreational vehicle products, namely, exhaust system de-coupler, inflator heat sinks for vehicle air bag systems, exhaust gas recirculation (EGR) gaskets, heat insulating shield isolators, engine crankcase breathers, oil separators; [ catalytic converters, catalytic converter units for vehicle exhaust; diesel exhaust system particulate filters (DPF), ] fuel injection filters; motorcycle/atv engine mufflers; general industrial products, namely, knitted wire mesh vibration isolators for machines, oil, gas and air filters for motors and engines, made of knitted wire mesh, knitted wire mesh heat wicks used in commercial and aerospace cooling systems for engines, knitted wire mesh spark arrestors for engines, mufflers for internal combustion engines made of knitted wire mesh, pneumatic tool mufflers, air compressor breather elements, air, liquid and gas filters for internal combustion engines; metal gaskets made of knitted wire mesh for sealing housings for use in exhaust systems in motor vehicles; manifolds, namely, sealing hoses and pipes in the transportation industry, namely, for use in exhaust systems in motor vehiclesACTIVEOct 1, 2008
009EMI/RFI shielding vents, namely, non-metal ventilating ducts for shielding EMI/RFI; process equipment products, namely, electrostatic precipitator used in HVAC, exhaust, and internal chemical processing systemsACTIVEOct 1, 2008
011lint traps, namely, knitted wire mesh socks for use in removing lint from the waste line of a commercial or residential washing machine; Process equipment products, namely, coalescer filters, mist filters, gas scrubbers and dryers for use in removing liquid and contaminants from an air stream in a chemical process or other industrial installationACTIVEOct 1, 2008
012knitted wire mesh vibration dampers for damping and isolating engine vibration from motor vehicles; knitted wire mesh harmonic dampers used in damping exhaust and other powertrain system vibrations in motor vehicles; knitted wire mesh isolators for heat shields and various components attached to the powertrain in motor vehicles; Automotive, truck, marine, train and recreational vehicle products, namely, air dryers for use in removing liquid from the compressed air in vehicle air operated braking systems; spherical ball and socket joints for sealing tube and pipe systems in vehicles which require axial flexation, brake air compressors for land vehiclesACTIVEOct 1, 2008
017process equipment products, namely, insulation blankets for industrial pipes; electromagnetic interference (EMI) and radio frequency interference (RFI) shielding products, namely, electrically conductive elastomeric gaskets, electrically conductive pressure sensitive adhesive tape, EMI/RFI foil grounding laminates, namely, products used for grounding or establishing continuity between or around electrical components; automotive truck, marine, train and recreational vehicle products, namely, catalytic converter support ceramic fibers mesh, catalytic converter end ceramic fibers seals; non-metal spiral wound gasket used for sealing flange joints; conductive adhesives, namely, electrical insulating tape, electrical tape, glass fiber electrical tape; process equipment products, namely, tower packing bodies for providing fluid contact in packed columns and towers composed primarily of stainless steel or nickel base alloy wires knit into a mesh form used in the preparation of pharmaceuticals, flavors and fragrances, specialty chemicals, petroleum and petrochemicals; Electromagnetic interference (EMI) and radio frequency interference (RFI) shielding products, namely, conductive elastomeric gaskets for EMI/RFI shielding, conductive braided sleevingACTIVEOct 1, 2008
019general industrial products, namely, non-metal mesh chimneys, aviary of non-metal mesh; [ vinyl windows used for EMI and RFI shielding; ] non-metal vent covers for HVAC ducts for shielding EMI/RFI; electrostatic shielding products, namely, non-metal windows which incorporate a function of shielding electrostatic discharge in or out of a particular environment; [ non-metal pre-fabricated EMI/RFI shielded rooms, namely, complete fabricated rooms used in the medical healthcare, power generation industry, as well as rooms for use in military and intelligence operations, which provide an environment free from the effects of external EMI/RFI, and an environment which does not emit EMI/RFI outside of the room ]ACTIVEOct 1, 2008
021Cleaning products, namely, knitted wire mesh scouring pads, knitted wire mesh scrubbing sponges [ ; metal mesh chimney cleaning sponge ]ACTIVEOct 1, 2008

Related trademarks

CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.

Prosecution history

DateCodeEventWhat it means
Feb 9, 2022NAS8NOTICE OF ACCEPTANCE OF SEC. 8 - E-MAILED—
Feb 8, 2022RNL1REGISTERED AND RENEWED (FIRST RENEWAL - 10 YRS)The trademark registration was renewed for another 10-year term after acceptable maintenance filings. RNL1, RNL2, and RNL3 indicate which renewal cycle (first, second, or third 10-year term) was recorded. The registration remains active.
Feb 8, 20229G8PREGISTERED - SEC. 9 GRANTED/CHECK RECORD FOR SEC. 8—
Feb 8, 20228PRTREGISTERED - PARTIAL SEC. 8 (10-YR) ACCEPTED—
Feb 8, 2022APRECASE ASSIGNED TO POST REGISTRATION PARALEGAL—
Aug 31, 2021E89RTEAS SECTION 8 & 9 RECEIVED—
Dec 27, 2020REM2COURTESY REMINDER - SEC. 8 (10-YR)/SEC. 9 E-MAILED—
Jan 30, 2018NA85NOTICE OF ACCEPTANCE OF SEC. 8 & 15 - E-MAILED—
Jan 30, 2018C15AREGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK.—
Jan 30, 2018APRECASE ASSIGNED TO POST REGISTRATION PARALEGAL—
Jan 11, 2018E815TEAS SECTION 8 & 15 RECEIVED—
Dec 27, 2016REM1COURTESY REMINDER - SEC. 8 (6-YR) E-MAILED—
Dec 27, 2011R.PRREGISTERED-PRINCIPAL REGISTERYour trademark is registered on the Principal Register — the strongest form of federal trademark protection. You may use the ® symbol for the covered goods and services. Maintenance filings (Section 8 and renewals) are required to keep the registration alive.
Oct 11, 2011NPUBOFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED—
Oct 11, 2011PUBOPUBLISHED FOR OPPOSITIONYour mark was published in the USPTO Official Gazette for a 30-day opposition window. During that period, third parties who believe they would be harmed can file an opposition. If no opposition is filed, prosecution usually continues toward registration or a Notice of Allowance.
Sep 8, 2011PREVLAW OFFICE PUBLICATION REVIEW COMPLETED—
Sep 3, 2011CNSAAPPROVED FOR PUB - PRINCIPAL REGISTER—
Sep 3, 2011XAECEXAMINER'S AMENDMENT ENTERED—
Sep 3, 2011XAECEXAMINER'S AMENDMENT ENTERED—
Sep 3, 2011GNENNOTIFICATION OF EXAMINERS AMENDMENT E-MAILED—
Sep 3, 2011GNEAEXAMINERS AMENDMENT E-MAILED—
Sep 3, 2011CNEAEXAMINERS AMENDMENT -WRITTEN—
Sep 3, 2011ZZZXPREVIOUS ALLOWANCE COUNT WITHDRAWN—
Aug 29, 2011PBSRWITHDRAWN FROM PUB - SENIOR ATTORNEY REQUEST—
Aug 12, 2011PREVLAW OFFICE PUBLICATION REVIEW COMPLETED—
Aug 10, 2011EXPTEXPARTE APPEAL TERMINATED—
Aug 10, 2011CNSAAPPROVED FOR PUB - PRINCIPAL REGISTER—
Aug 10, 2011XAECEXAMINER'S AMENDMENT ENTERED—
Aug 10, 2011XAECEXAMINER'S AMENDMENT ENTERED—
Aug 10, 2011GNENNOTIFICATION OF EXAMINERS AMENDMENT E-MAILED—
Aug 10, 2011GNEAEXAMINERS AMENDMENT E-MAILED—
Aug 10, 2011CNEAEXAMINERS AMENDMENT -WRITTEN—
Aug 4, 2011JURTJURISDICTION RESTORED TO EXAMINING ATTORNEY—
May 31, 2011GNS1NOTIFICATION OF SUBSEQUENT FINAL EMAILED—
May 31, 2011GNSFSUBSEQUENT FINAL EMAILED—
May 31, 2011CFRCSUBSEQUENT FINAL REFUSAL WRITTEN—
May 5, 2011TEMETEAS/EMAIL CORRESPONDENCE ENTERED—
May 5, 2011CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Apr 29, 2011TROATEAS RESPONSE TO OFFICE ACTION RECEIVEDThis event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action.
Jan 10, 2011GNRNNOTIFICATION OF NON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Jan 10, 2011GNRTNON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Jan 10, 2011CNRTNON-FINAL ACTION WRITTENA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Dec 20, 2010TEMETEAS/EMAIL CORRESPONDENCE ENTERED—
Dec 20, 2010CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Dec 20, 2010TROATEAS RESPONSE TO OFFICE ACTION RECEIVEDThis event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action.
Jun 23, 2010GNRNNOTIFICATION OF NON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Jun 23, 2010GNRTNON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Jun 23, 2010CNRTNON-FINAL ACTION WRITTENA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
May 26, 2010DOCKASSIGNED TO EXAMINER—
Apr 23, 2010ZZZXPREVIOUS ALLOWANCE COUNT WITHDRAWN—
Apr 23, 2010PBSRWITHDRAWN FROM PUB - SENIOR ATTORNEY REQUEST—
Apr 20, 2010PREVLAW OFFICE PUBLICATION REVIEW COMPLETED—
Apr 20, 2010ALIEASSIGNED TO LIE—
Apr 5, 2010CNSAAPPROVED FOR PUB - PRINCIPAL REGISTER—
Apr 5, 2010XAECEXAMINER'S AMENDMENT ENTERED—
Apr 5, 2010GNENNOTIFICATION OF EXAMINERS AMENDMENT E-MAILED—
Apr 5, 2010GNEAEXAMINERS AMENDMENT E-MAILED—
Apr 5, 2010CNEAEXAMINERS AMENDMENT -WRITTEN—
Mar 17, 2010TEMETEAS/EMAIL CORRESPONDENCE ENTERED—
Mar 17, 2010CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Mar 17, 2010ALIEASSIGNED TO LIE—
Mar 10, 2010ERFRTEAS REQUEST FOR RECONSIDERATION RECEIVED—
Mar 10, 2010EXPIEX PARTE APPEAL-INSTITUTED—
Mar 10, 2010JURTJURISDICTION RESTORED TO EXAMINING ATTORNEY—
Mar 10, 2010EXAFEXPARTE APPEAL RECEIVED AT TTAB—
Sep 14, 2009GNFNNOTIFICATION OF FINAL REFUSAL EMAILED—
Sep 14, 2009GNFRFINAL REFUSAL E-MAILEDA final Office Action (final refusal) means the examining attorney is maintaining at least one refusal and your options are narrower. You can file a response addressing the refusal, appeal to the Trademark Trial and Appeal Board, or let the application abandon.
Sep 14, 2009CNFRFINAL REFUSAL WRITTENA final Office Action (final refusal) means the examining attorney is maintaining at least one refusal and your options are narrower. You can file a response addressing the refusal, appeal to the Trademark Trial and Appeal Board, or let the application abandon.
Aug 21, 2009TEMETEAS/EMAIL CORRESPONDENCE ENTERED—
Aug 20, 2009CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Aug 20, 2009TROATEAS RESPONSE TO OFFICE ACTION RECEIVEDThis event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action.
Feb 25, 2009GNRNNOTIFICATION OF NON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Feb 25, 2009GNRTNON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Feb 25, 2009IUAAUSE AMENDMENT ACCEPTED—
Feb 25, 2009CNRTNON-FINAL ACTION WRITTENA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Feb 16, 2009DOCKASSIGNED TO EXAMINER—
Jan 22, 2009AUPCAMENDMENT TO USE PROCESSING COMPLETE—
Jan 22, 2009IUAFUSE AMENDMENT FILED—
Jan 21, 2009EAAUTEAS AMENDMENT OF USE RECEIVED—
Nov 20, 2008NWAPNEW APPLICATION ENTERED—

Frequently asked questions

Related guidance