USPTO serial 85039924
Serial No. 85039924
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- —
- Examiner
- DWYER, JOHN D
- Law office
- TMO LAW OFFICE 116 - EXAMINING ATTORNEY ASSIGNED
What this means
These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.
Need help with Serial No. 85039924?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.
Owner
Attorney of record
The USPTO lists this attorney as the applicant's representative for correspondence on this application.
Timothy J. Kelly
TIMOTHY J. KELLY FITZPATRICK, CELLA, HARPER & SCINTO1290 AVENUE OF THE AMERICAS FL 17NEW YORK, NY 10104-3800UNITED STATESGoods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 007 | Machine parts, namely, bearing boxes, bearings, bearing assemblies and components thereof, namely, structural parts; free-wheel clutches for machines, and spindles and bearing inserts therefore; machine parts for diesel engines and gasoline engines, namely, plain bearings and rolling bearings, namely, ball bearings, roller bearings, needle roller bearings, tapered roller bearings and structural parts thereof; machine parts for electric pumps for air and liquid discharge, namely, plain bearings and rolling bearings, namely, ball bearings, roller bearings, needle roller bearings, tapered roller bearings and structural parts thereof; machine parts for machines used in the textile industry including spinning, weaving, and coloring machines, namely, plain bearings and rolling bearings, namely, ball bearings, roller bearings, needle roller bearings, tapered roller bearings and structural parts thereof; thrust needle roller bearings being machine parts, thrust spherical roller bearings being machine parts, thrust groove ball bearings being machine parts, angular contact thrust ball bearings being machine parts, thrust cylindrical roller bearings being machine pads; thin ring bearings being machine parts for motors, engines, and industrial machinery; cage guides being machine pads for motors, engines, and industrial machinery; tapered roller bearings being machine pads for motors, engines, and industrial machinery; combined axial/radial bearings being parts of machines; ball circulation guides being parts of machines; clutch plates being pads of clutches for machines; linear ball bearing guides being parts of machines; linear tables, being parts of machine motors, engines and industrial machinery; needle roller bearings guides being parts of machines; self-aligning ball bearings guides being parts of machines; self-aligning roller bearings guides being parts of machines; self-aligning roller bearings guides being parts of machines; belt tension rollers being parts of machines; deep groove and angular contact ball bearings being parts of machines; roller screw drives being parts of industrial machines; roller circulation guides being parts of machine motors, engines and industrial machinery; insert bearings and housing units being parts of industrial machines; spindle bearings being parts of industrial machines; yoke-type and stud-type track rollers being parts of industrial machines; spherical roller bearings being parts of industrial machines; four-point contact bearings being parts of industrial machines; rolling bearing components and accessories, namely, shafts being accessories for linear guides being parts of machine motors, engines and industrial machinery; cylindrical roller bearings being parts of industrial machines; components for power transmission systems for machines, namely, bearings; bearings being parts of machines for use with measuring systems; belt pulleys being parts of industrial machines; belt tension pulleys being parts of industrial machines; and tension rollers as parts of machines and engines | ACTIVE | Oct 31, 1982 |
| 009 | Measuring devices for use in connection with machine parts and ball bearings, namely, devices for measuring internal and external dimensions, feeler gauges, taper gauges, thread gauges, leveling gauges, angle finders, enveloping circle gauges, vibration meters; analytical appliances, not for medical purposes, namely, test benches, namely, test machines, devices and stands designed for bearing function testing; analytical appliances not for medical purposes for technical oils and greases, namely, grease and oil life test machines; measuring devices for matching, namely, feeler gauges, taper gauges; measuring devices for measuring lengths and diameters, particularly of components of anti-friction bearings; liquid leveling sensors; test benches, namely, test machines, devices and stands designed for bearing function testing; and testing machines for technical oils and greases, namely, contamination measurement devices, lubricity gauges, grease and oil life test machines | ACTIVE | Oct 31, 1982 |
| 012 | Parts for vehicles fitted with bearings and bearing elements, namely, prime movers for land vehicles, specifically, engines for land vehicles; axle boxes and wheel sets for railway and tram cars, wheel sets with cases and bearings for transport trucks and narrow gauge railways, axles and hubs for road vehicles; land vehicle components, namely, bearings and bearing elements, namely, non-electric prime movers for land vehicles, namely, internal combustion engines, gasoline engines; parts of land vehicles, namely, axle boxes and wheel sets for railway and tram cars, wheel sets with cases and bearings for transport trucks and narrow gauge railways, axles and hubs for road vehicle wheels; roller, tapered and sliding bearings, clutches, clutch plates and clutch release bearings, all being parts of transmissions for land vehicles; clutch components for land vehicles, namely, pilot or clutch guide bearings being parts of clutches for land vehicles; and wheel bearing kits for use with land vehicles, namely bearings and bearing elements, namely rings and rollers, all being parts of land vehicles | ACTIVE | Oct 31, 1982 |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
- Other trademarks owned by SCHAEFFLER TECHNOLOGIES AG & CO. KG
- Other trademarks owned by SCHAEFFLER TECHNOLOGIES GMBH & CO. KG
- Other trademarks in Class 007
- Other trademarks in Class 009
- Other trademarks in Class 012
- Prosecution event MAB2 explained
- Recently changed USPTO trademarks
- Recently filed trademarks
- Browse all trademark records
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Apr 16, 2012 | MAB2 | ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Apr 16, 2012 | ABN2 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Mar 7, 2012 | ASGN | AUTOMATIC UPDATE OF ASSIGNMENT OF OWNERSHIP | — |
| Sep 19, 2011 | CNRT | NON-FINAL ACTION MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Sep 19, 2011 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Mar 21, 2011 | CNRT | NON-FINAL ACTION MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Mar 19, 2011 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Feb 22, 2011 | TEME | TEAS/EMAIL CORRESPONDENCE ENTERED | — |
| Feb 22, 2011 | CRFA | CORRESPONDENCE RECEIVED IN LAW OFFICE | — |
| Feb 22, 2011 | TROA | TEAS RESPONSE TO OFFICE ACTION RECEIVED | This event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action. |
| Aug 20, 2010 | CNRT | NON-FINAL ACTION MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Aug 19, 2010 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Aug 12, 2010 | DOCK | ASSIGNED TO EXAMINER | — |
| May 22, 2010 | MDSC | NOTICE OF DESIGN SEARCH CODE MAILED | — |
| May 21, 2010 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| May 20, 2010 | NWAP | NEW APPLICATION ENTERED | — |