USPTO serial 85044162
HOMEX DESIGN CENTER
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- —
- Examiner
- CHANG, KATHERINE S
- Law office
- TMO LAW OFFICE 115 - EXAMINING ATTORNEY ASSIGNED
What this means
These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.
Need help with HOMEX DESIGN CENTER?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.
Owner
Waterbury, CT
Goods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 019 | Adhesive mortar for building purposes; Aggregate material composed of crushed stone; Asphalt; Asphalt felt; Asphalt-based mastics for foundations of buildings; Bird baths made of stone or concrete; Board material made of polyethelene used as a wood substitute; Building construction materials in the nature of aromatic cedar planking; Building glass; Building material, namely, plastic webbing material used to reinforce bituminous waterproofing sheets; Building materials, namely, cellular PVC trim; Building materials, namely, composite panels composed primarily of nonmetal materials; Building materials, namely, concrete-based slabs made using recycled glass; Building materials, namely, manufactured brick veneer for use on interior and exterior walls, floors and surfaces, patios, poolsides and driveways; Building materials, namely, non-metal countertops for further installation; Building materials, namely, plastic pipe supports; Building materials, namely, semi-worked woods; Building seam tape; Building stone; Building timber; Cementitious material for building purposes; Colored sheet glass; Common sheet glass; Concrete building materials, namely, blocks and planks; Construction material, namely, fiberglass board; Construction material, namely, fiberglass faced panels; Construction material, namely, fiberglass faced sheathing; Construction material, namely, fiberglass panels; Construction material, namely, nonmetal exterior boards; Construction material, namely, nonmetal exterior panels; Construction materials, namely, composite panels consisting of a rigid expanded polystyrene core bonded to an outer skin of MDF (medium-density fiberboard) wood sheet; Construction materials, namely, non-metal bonding fasteners for mounting and demounting of ceiling and wall panels; Construction materials, namely, nonmetal toilet partitions; Construction materials, namely, underlays of agglomerated cork; Decorative glass; Fired refractory materials, not of metal; Floor patching materials, namely, concrete sealers; Glass blocks for building; Glass for building; Glass mosaics for use in building construction; Glass panels for building construction purposes; Glass powder for building purposes; Glass powder made from recycled glass waste for building purposes; Gypsum; Hydrated lime for building purposes; Laminated flat glass; Logs; Marble; Modified sheet glass; Multilayer panels of plastic for use in building; Non metallic transportable buildings; Non-metal building flashing; Non-metal building material, namely, fascia; Non-metal building materials, namely, soffits; Non-metal building products, namely, shutters, shingles, siding, and trim; Non-metal cladding for construction and building; Non-metal construction materials, namely, xylolith; Non-metal decorative moldings and decorative trim for use in building construction; Non-metal exterior building shutters; Non-metal forming systems for concrete and other curable construction materials comprised of non-metal modular casting forms; Non-metal self-aligning demountable snap fasteners consisting of press fasteners and press studs for use in attaching panels, hatches, floors and furniture in buildings; Non-metal weight-supporting corbels for building purposes; Non-metallic reinforcements for concrete and wood building construction, namely, plates, rods and bars; Non-woven textiles made of synthetic fibres for use in the building industry; Nonmetal cable trays used in building construction; Nonmetal construction materials, namely, drilled and grouted pile foundations; Nonmetal door parts for buildings, namely, adjusters for adjusting the height of a door, floor boards, columns, beams, paneling boards, sills, sleepers, backings for ceilings or walls, stiles, rails and ceiling boards; Nonmetallic construction materials, namely, drain bases and grates; Nonstructural building materials, namely, granite used in decorative surface applications for countertops and vanity tops; Packaging materials made from minerals, namely, limestone; Pavement incorporating silicon solar cell material for electrical energy generation; Plaster; Polyethelene board material used as a wood substitute; Prefabricated non-metal buildings; Raw and coated chip boards for the building industry, furniture and interior decorating; Refractory construction materials, not of metal; Reinforcing materials not of metal for building purposes; Rigid pipes of polypropylene for the supply of drinking water and heating and air conditioning systems in houses, office buildings and industrial buildings; Rock materials used in the manufacture of flooring, roofing, countertops, walls, cladding and fireplaces; Seam tape for building; Stone for building and construction; Synthetic flooring materials or wall-claddings; Travertine for building and construction purposes; Waterproof fabric used in building construction for protection against floods | ACTIVE | Feb 9, 2010 |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Apr 1, 2011 | MAB2 | ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Apr 1, 2011 | ABN2 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Sep 2, 2010 | GNRN | NOTIFICATION OF NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Sep 2, 2010 | GNRT | NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Sep 2, 2010 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Sep 2, 2010 | DOCK | ASSIGNED TO EXAMINER | — |
| May 26, 2010 | MDSM | NOTICE OF DESIGN SEARCH CODE MAILED | — |
| May 25, 2010 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| May 24, 2010 | NWAP | NEW APPLICATION ENTERED | — |