USPTO serial 86347887
DAYTON LAMINA
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- —
- Examiner
- RUTLAND, BARBARA A
- Law office
- TMEG LAW OFFICE 101 - EXAMINING ATTORNEY ASSIGNED
What this means
These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.
Need help with DAYTON LAMINA?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.
Owner
Attorney of record
The USPTO lists this attorney as the applicant's representative for correspondence on this application.
Sarah Otte Graber
SARAH OTTE GRABER WOOD HERRON & EVANS LLP2700 CAREW TOWERCINCINNATI, OH 45202-2814UNITED STATESGoods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 006 | dowel pins, cap screws, set screws, stripper bolts; metal screws and metal bolts; metal hardware, namely compression springs, and extended life die springs, metal springs | ACTIVE | — |
| 007 | machine tools, namely, punches; die sets for use with machine tools; machines for forming, piercing or trimming sheet metal in sheet metal stamping operations; industrial machine presses; aerial and die mount cams, modular cams, bump cams and box cams all for use in sheet metal forming machines; tool maker supplies, gage maker supplies and die maker supplies-namely, guide post bushings, guide posts, die springs, goose-neck clamps, toggle clamps, punch shanks, swivel adaptors, laps, arbors, bolster plates; steel plates and cam units for use with industrial machine presses; machine tooling components for sheet metal dies and plastic molds, namely bushings, guide posts, mold pins, wear plates, wear strips, wear ways, gib assemblies, keeper blocks, slide gibs, guide blocks, keeper plates, guide plates, lifter pins, lifter lugs, pad retainers, spring cages, spring guards, spring retainers, v-blocks, center keys, center keys guides and t-gibs; in-die tapping units and taps for use in industrial machine presses; die press accessories, namely bushings, bosses, dowel pins, bolts, nuts, washers, clamps, guide posts, hoist rings; lubrication supplies, namely lube guns, guide post lubricant, and lubricant for in-die tapping units; pry bars, roller stock guides, screw keys, and stock punchers for use with industrial presses; accessories for use with punches, namely quills, quill retainers, quill guides, quill buttons, punch retainers, die blanks, and thread form products, namely die buttons and thread form sets comprised of form punches, pierce punches and die buttons, all for use with industrial machine presses, urethane strippers and rubber strippers for use with industrial machine presses; gas springs and die springs for use with industrial machine presses; tooling components, namely, cam gibs, plates, draw die leveling blocks, gib blocks, gibs, gib lids, u-blocks, split v drivers, base plates for gib assemblies, wear strips, l- wear strip ways, cam slide units, pad retainers, spools, stop blocks, kiss blocks, set screws, casting liners, guide pins, guide posts, mold pins, urethane pads with metal backing plates, and ramp gages for sheet metal dies and plastic molds, wear plates, spring guards, spring retainers; bronze plated tooling components, namely, bearings, steel pins, steel pins for dies and molds, stock lifters for dies, rail stock lifter pins for dies and molds, wear plates and side plates, gibs and mold bushings, all being parts used in dies and die-sets, plastic molding machines, stamping dies, transfer machinery and conveyors; hydraulic drill heads, hydraulic drill motors and hydraulic power units; springs, machine parts, namely, antifriction guidance bearings for die sets and metal-forming machines, and bearings for machine tools, business machines and industrial machines, die sets; bolsters, and guide posts for metal-forming machines; bearings; bushings; bushing drivers, machine parts; namely, cam slide units, tubular ball bearing assemblies for use in die sets, ball bearing assemblies for use in die sets, machine parts, namely, hydraulic drill heads; hydraulic power units; hydraulic/electronic die setters for opening dies; hydraulic motors; aerial and die mount cams; modular cams; bump and box cams for use in metal forming machinery; metal fabrications, namely, custom made angle plates for boring mills, fixture bases for parts checking fixtures and custom made gear boxes; die press accessories, namely, bosses, dowel pins, set screws, bolts, nuts, washers, clamps, hoist rings, pry bars, punch shanks, roller stock guides, screw keys, and stock punchers for use with industrial presses; urethane strippers and rubber strippers for use with industrial machine presses; gas springs and die springs for use with industrial machine presses; in-die tapping units and taps for use in industrial machine presses; rotary bending systems used in sheet metal dies; hydraulic drill heads, hydraulic drill motors and hydraulic power units, hydraulic/electronic die setters for opening dies; die sets, cut and ground plate, and machined plate for metal stamping; wear resisting surface coating sold as a component of machine tools, namely, punches and pilots; metal fabricating and stamping machines and machine tools, namely, metal stamping presses, metal stamping matrixes, dies for use with machine tools, insert dies; metal fabricating and stamping machines and machine tools, namely, shear blades and inserts; metal fabricating and stamping machine parts, namely ball locks, powder compaction tools, metal engraving tools, pin stamping tools, cutting tools, namely broaches, taps, reamers, drills and milling cutters, ball lock retainers; machine tools and dies for metal fabricating and stamping, namely locking devices cooperating therewith, matrices, guides, and pilots; retainer system comprised of interlocking parts made of metal, for use in machine punch presses; metalworking machine tools for fabricating and stamping, namely, compound tooling kits comprised of punches, stripper, die button, and knockout; tooling components for injection molding machines for use in the plastic molding industry, namely metal ejector pins; plastic injection mold unit inserts | ACTIVE | — |
| 008 | Die sets | ACTIVE | — |
| 017 | Urethane, plastic and rubber in sheet, bar and rod form for use with industrial machinery | ACTIVE | — |
| 040 | Manufacture of machine parts to the order and specification of others | ACTIVE | — |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
- Other trademarks owned by Dayton Progress Corporation
- Other trademarks in Class 006
- Other trademarks in Class 007
- Other trademarks in Class 008
- Other trademarks in Class 017
- Other trademarks in Class 040
- Similar marks named DAYTON LAMINA
- Prosecution event MAB2 explained
- Recently changed USPTO trademarks
- Recently filed trademarks
- Browse all trademark records
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Jun 26, 2015 | MAB2 | ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Jun 26, 2015 | ABN2 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Nov 24, 2014 | GNRN | NOTIFICATION OF NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Nov 24, 2014 | GNRT | NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Nov 24, 2014 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Nov 7, 2014 | DOCK | ASSIGNED TO EXAMINER | — |
| Aug 4, 2014 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| Jul 29, 2014 | NWAP | NEW APPLICATION ENTERED | — |