USPTO serial 87554816
Reviewed by CopyMark Law Group
Status 702 means the registration is active, Section 8 was accepted, and a Section 15 declaration of incontestability was also accepted. Incontestability strengthens your rights by limiting certain challenges after five years of continuous use. Continue use in commerce and plan for the 10-year Section 8 and 9 renewal.
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
San Luis Obispo, CA, US
SAN LUIS OBISPO, CA, US
San Luis Obispo, CA, US
The USPTO lists this attorney as the applicant's representative for correspondence on this application.
Cynthia Replogle
2950 Broad Street #1064San Luis Obispo, CA 93401United States| Class | Description | Status | First use |
|---|---|---|---|
| 008 | Hand-operated tools for electronic device repair, namely, opening picks for electronic devices, spudgers, tweezers, screwdriver bits in the nature of cross-shaped tip bits for screwdrivers, flathead bits for screwdrivers, star bits for screwdrivers, star security bits for screwdrivers, pentalobe bits for screwdrivers, cruciform-blade bits for screwdrivers, hex bits for screwdrivers, tri-point bits for screwdrivers, tri-wing bits for screwdrivers, nut driver bits for screwdrivers, square bits for screwdrivers, gamebits for screwdrivers, spanner bits for screwdrivers, triangle bits for screwdrivers, and screwdriver bits for ejecting subscriber identity module cards, fastening and joining tools in the nature of bit drivers, bit holders in the nature of bit drivers, screwdrivers, clamps and hammers, hand-operated tools for cutting, drilling, grinding, and sharpening surfaces, hand-operated tools for treating surfaces in the nature of brushes for abrading, and pump sprayers, socket wrenches, non-electric miniature screwdrivers, precision screwdrivers, and screwdrivers, tap wrenches, flexible head spanners, mallets, electric irons, wire cutters, flush cutters, cutting wheels, flush micro cutters, flush macro cutters, utility knives, scissors, and razor blades, glass scrapers, crimping tools in the nature of crimping pliers, pincers, grippers in the nature of tongs for gripping components of electronic devices, combination pliers, locking pliers, claws pliers and locking clamps, picks for isolating batteries, opening wheels in the nature of cutters for opening electronic devices, driver handles for bits and nuts; hand-operated tool kits for electronic device repair, specifically, tool kits primarily comprised of two or more opening picks for electronic devices, spudgers, tool rolls in the nature of roll-up fabric containers for hand tools, tweezers, screwdriver bits in the nature of cross-shaped tip bits for screwdrivers, flathead screwdriver bits, star bits for screwdrivers, star security bits for screwdrivers, pentalobe bits for screwdrivers, cruciform-blade bits for screwdrivers, hex bits for screwdrivers, tri-point bits for screwdrivers, tri-wing bits for screwdrivers, nut driver bits for screwdrivers, square bits for screwdrivers, gamebits for screwdrivers, spanner bits for screwdrivers, triangle bits for screwdrivers, and screwdriver bits for ejecting subscriber identity module cards, bit drivers, bit holders in the nature of bit drivers, screwdrivers, clamps and hammers, hand tools for cutting, drilling, grinding, and sharpening, socket wrenches, non-electric miniature screwdrivers, precision screwdrivers, and screwdrivers, tap wrenches, flexible head spanners, mallets, wire cutters, flush cutters, cutting wheels, flush micro cutters, flush macro cutters, utility knives, scissors, and razor blades, glass scrapers, crimping tools in the nature of crimping pliers, pincers, grippers in the nature of tongs for gripping components of electronic devices, combination pliers, locking pliers, claws pliers and locking clamps, and also including anti-static wrist straps to protect against electrostatic discharge, suction cups for separating components, specifically, glass and gloss plastic, magnetic pads for organizing small parts, metal measuring rulers, fastening and joining tools in the nature of soldering irons, soldering irons, sealing irons, adhesive-melting and electric irons, work mats in the nature of work-surface mats, electrostatic discharge-safe tools in the nature of antistatic work-surface mats, wrist straps, and heating tools for loosening adhesive, shaping components, electronics rework, removing and installing electronics components, and soldering, and hand-operated tools for treating surfaces in the nature of brushes, wipes, and pump sprayers | ACTIVE | Aug 31, 2013 |
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
| Date | Code | Event | What it means |
|---|---|---|---|
| Jul 16, 2026 | TCCA | TEAS CHANGE OF CORRESPONDENCE RECEIVED | — |
| Jul 16, 2026 | ARAA | ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED | This event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action. |
| Jul 16, 2026 | REAP | TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED | — |
| Jul 16, 2026 | CHAN | APPLICANT/CORRESPONDENCE CHANGES (NON-RESPONSIVE) ENTERED | — |
| Jul 16, 2026 | COAR | TEAS CHANGE OF OWNER ADDRESS RECEIVED | — |
| Nov 25, 2024 | NA85 | NOTICE OF ACCEPTANCE OF SEC. 8 & 15 - E-MAILED | — |
| Nov 25, 2024 | C15A | REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK. | — |
| Nov 25, 2024 | APRE | CASE ASSIGNED TO POST REGISTRATION PARALEGAL | — |
| Jun 12, 2024 | E815 | TEAS SECTION 8 & 15 RECEIVED | — |
| Jun 12, 2023 | REM1 | COURTESY REMINDER - SEC. 8 (6-YR) E-MAILED | — |
| Nov 9, 2022 | TCCA | TEAS CHANGE OF CORRESPONDENCE RECEIVED | — |
| Nov 9, 2022 | ARAA | ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED | This event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action. |
| Nov 9, 2022 | REAP | TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED | — |
| Nov 30, 2021 | WOAG | WITHDRAWAL OF ATTORNEY GRANTED | — |
| Nov 30, 2021 | WOAR | TEAS WITHDRAWAL OF ATTORNEY RECEIVED | — |
| Nov 30, 2021 | CHAN | APPLICANT/CORRESPONDENCE CHANGES (NON-RESPONSIVE) ENTERED | — |
| Nov 30, 2021 | TCCA | TEAS CHANGE OF CORRESPONDENCE RECEIVED | — |
| Nov 30, 2021 | ARAA | ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED | This event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action. |
| Nov 30, 2021 | REAP | TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED | — |
| Nov 30, 2021 | COAR | TEAS CHANGE OF OWNER ADDRESS RECEIVED | — |
| Jun 12, 2018 | R.PR | REGISTERED-PRINCIPAL REGISTER | Your trademark is registered on the Principal Register — the strongest form of federal trademark protection. You may use the ® symbol for the covered goods and services. Maintenance filings (Section 8 and renewals) are required to keep the registration alive. |
| Mar 27, 2018 | NPUB | OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED | — |
| Mar 27, 2018 | PUBO | PUBLISHED FOR OPPOSITION | Your mark was published in the USPTO Official Gazette for a 30-day opposition window. During that period, third parties who believe they would be harmed can file an opposition. If no opposition is filed, prosecution usually continues toward registration or a Notice of Allowance. |
| Mar 7, 2018 | NONP | NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED | — |
| Feb 22, 2018 | ALIE | ASSIGNED TO LIE | — |
| Feb 12, 2018 | CNSA | APPROVED FOR PUB - PRINCIPAL REGISTER | — |
| Feb 8, 2018 | XAEC | EXAMINER'S AMENDMENT ENTERED | — |
| Feb 8, 2018 | GNEN | NOTIFICATION OF EXAMINERS AMENDMENT E-MAILED | — |
| Feb 8, 2018 | GNEA | EXAMINERS AMENDMENT E-MAILED | — |
| Feb 8, 2018 | CNEA | EXAMINERS AMENDMENT -WRITTEN | — |
| Jan 17, 2018 | TEME | TEAS/EMAIL CORRESPONDENCE ENTERED | — |
| Jan 16, 2018 | CRFA | CORRESPONDENCE RECEIVED IN LAW OFFICE | — |
| Jan 16, 2018 | TROA | TEAS RESPONSE TO OFFICE ACTION RECEIVED | This event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action. |
| Nov 3, 2017 | GNRN | NOTIFICATION OF NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Nov 3, 2017 | GNRT | NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Nov 3, 2017 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Nov 2, 2017 | DOCK | ASSIGNED TO EXAMINER | — |
| Aug 9, 2017 | MDSC | NOTICE OF DESIGN SEARCH CODE E-MAILED | — |
| Aug 8, 2017 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| Aug 7, 2017 | NWAP | NEW APPLICATION ENTERED | — |