USPTO serial 87760794
E
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- Jun 18, 2019
- Examiner
- FREEMAN, BREANNA SHALEISE
- Law office
- Historical data usage
What this means
Status 702 means the registration is active, Section 8 was accepted, and a Section 15 declaration of incontestability was also accepted. Incontestability strengthens your rights by limiting certain challenges after five years of continuous use. Continue use in commerce and plan for the 10-year Section 8 and 9 renewal.
Need help with E?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.
Owner
Strongsville, OH
Strongsville, OH
Strongsville, OH
Attorney of record
The USPTO lists this attorney as the applicant's representative for correspondence on this application.
Stacy L. Emhoff
Stacy L. Emhoff WALKER & JOCKE CO., LPA231 SOUTH BROADWAYMEDINA, OH 44256United StatesGoods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 006 | Metal latches, locks, hinges and handles in the nature of knobs and pulls for cabinets, drawers and closures; Metal latches for multi-purpose use; Lockable and padlockable metal latches; Metal cam latches, metal key operated cam latches and adjustable metal cam latches; Metal slam latches, metal compartment latches, metal hasp latches, metal draw latches and metal take-up latches; Metal flush mountable, recess mountable and surface mountable latches; Metal quarter-turn and half-turn latches; Metal compression and swell latches; Metal rotary latches, Metal spring projected bolt latches and dead bolt latches; Metal finger pull and pull ring latches; Metal squeeze operated, push button operated, paddle handle operated, tool operated, trigger operated, linkage operated and cable operated latches; Metal single-point, two-point and multi-point latches; Metal pivotal handles, slidable handles, foldable handles, D- handles, L-handles, T-handles and push button handles specially adapted for for metal latches and metal locks; Metal locks for multi- purpose use; Pivotal door, sliding door, folding door, overhead door and gate metal locks; Combination operated and key operated metal locks; Flush mountable and surface mountable metal locks; Metal cam locks and metal adjustable cam locks; Pivotal handle operated, push button operated, paddle operated, tool operated and trigger operated metal locks; Metal lock cylinders; Metal keys for locks; Metal handles specially adapted for metal latches and locks; Metal pulls in the nature of pull handles and grab handles, for doors, drawers and cabinets; Lockable and padlockable metal handles in the nature of common metal pulls, metal knobs, metal door handles; Flush mountable, recess mountable and surface mountable metal handles for doors; Flush mountable, recess mountable and surface mountable metal pulls and knobs for drawers, cabinets, latches and locks; Metal foldable handles, D-handles, L-handles and T- handles for doors; Metal furniture fittings for drawers, cabinets, latches and locks; Metal hinges for general purpose use; Butt, strap and lift-off metal hinges; Flush mountable, recess mountable and surface mountable metal hinges; Metal door hardware, namely, strike plates, door guides and door holders; Metal hardware, namely, custom washers; Custom metal stampings, namely, rough and semi-finished iron casting alloys; Hardware, namely, metal tie down bracket for general use; Hardware, namely, metal general purpose rope dock cleats; Metal rope hooks; Metal pull dock cleats; Metal escutcheons for use behind handles of the foregoing types; Metal door hardware, namely, metal closure retainers for holding doors in open and closed positions; Metal hardware, namely, folding metal step ladders for general purpose use; metal hardware for land vehicles, namely, latches, locks of metal for vehicles, metal hinges, and door handles; and component parts for the aforementioned goods; locks of metal for vehicles, namely, hasps; metal fasteners, namely, bolts for end gates, namely, metal hinges for end gates for land vehicles; metal hinges for cabinets for land vehicles; metal hooks, namely, end gate catch hooks; metal runners for sliding doors, namely, sliding door guides; locks of metal for use on vehicles doors and cabinetry on vehicles | ACTIVE | Jan 8, 2018 |
| 007 | Springs being parts of machines, namely, gas spring units for regulating movements of closures, mounting components and parts therefor | ACTIVE | Jan 8, 2018 |
| 009 | Electrically and electronically controlled latches and locks, and component parts thereof; Electro-mechanical latches and locks, and component parts therefor; Electrically powered actuators for moving components of latches and locks, and for operating latches and locks, and component parts therefor; Electrical and electronic latches and locks and component parts therefor; Electronic control circuits for controlling side doors for busses and motor coaches; Electronic control circuits for controlling emergency doors for busses and coaches | ACTIVE | Jan 8, 2018 |
| 012 | Metal passenger restraint latches specially adapted for vehicles; Lockable and pad lockable latches specially adapted for vehicles; Cam latches, combination operated cam latches, key operated cam latches and adjustable cam latches specially adapted for vehicles; Slam latches, compartment latches, hasp latches, draw latches and take-up latches specially adapted for land vehicles; Flush mountable, recess mountable and surface mountable latches specially adapted for land vehicles; Quarter-turn and half-turn latches specially adapted for land vehicles; Compression and swell latches specially adapted for land vehicles; Rotary latches, spring projected bolt latches and dead bolt latches specially adapted for land vehicles; Finger pull and pull ring latches specially adapted for land vehicles; Squeeze operated, push button operated, paddle handle operated, tool operated, trigger operated, linkage operated and cable operated latches specially adapted for land vehicles; Single-point, two-point and multi-point latches specially adapted for land vehicles; Automobile door handles, namely, pivotal handle, slidable handle, foldable handle, D-handle, L-handle, T-handle and push button type handles; Automobile door handles, namely, handles for latches and locks, pull handles, grab handles, lockable and pad lockable handles, flush mountable, recess mountable and surface mountable handles. foldable handles, D-handles, L-handles and T-handles; Land vehicle parts, namely, tie down brackets and pull cleat brackets specially adapted for holding cargo in truck beds; Closure retainer for holding doors in open and closed positions specially adapted for motor car doors; Body handles, namely, interior roof handles specially adapted for vehicles and brackets therefor; Steps for attachment for land vehicles, namely, folding step irons for mounting on vehicles, Vehicle accessories, namely, mounts specially adapted for land vehicles in the nature of ladder holders | ACTIVE | Jan 8, 2018 |
| 020 | Locks not of metal for vehicles, namely, pivotal door, sliding door, folding door and overhead door locks, combination operated and key operated locks, flush mountable and surface mountable locks, cam locks and adjustable cam locks, pivotal handle operated, push button operated, paddle operated, tool operated and trigger operated locks, hasps; Non-metal hinges, namely, flush mountable, recess mountable and surface mountable hinges; Non-metal escutcheons for use behind handles; non-metal runners for sliding doors, namely, sliding door guides; pivot plates for end gates, namely, non-metal hinges for end gates for land vehicles, non-metal hinges for cabinets for trucks and utility vehicles | ACTIVE | Jan 8, 2018 |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
- Other trademarks owned by The Eastern Company
- Other trademarks owned by The Eastern Company
- Other trademarks owned by The Eastern Company
- Other trademarks in Class 006
- Other trademarks in Class 007
- Other trademarks in Class 009
- Other trademarks in Class 012
- Other trademarks in Class 020
- Similar marks named E
- Recently changed USPTO trademarks
- Recently filed trademarks
- Browse all trademark records
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Dec 17, 2024 | NA85 | NOTICE OF ACCEPTANCE OF SEC. 8 & 15 - E-MAILED | — |
| Dec 17, 2024 | C15A | REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK. | — |
| Dec 17, 2024 | APRE | CASE ASSIGNED TO POST REGISTRATION PARALEGAL | — |
| Jul 16, 2024 | E815 | TEAS SECTION 8 & 15 RECEIVED | — |
| Jun 18, 2024 | REM1 | COURTESY REMINDER - SEC. 8 (6-YR) E-MAILED | — |
| Jun 18, 2019 | R.PR | REGISTERED-PRINCIPAL REGISTER | Your trademark is registered on the Principal Register — the strongest form of federal trademark protection. You may use the ® symbol for the covered goods and services. Maintenance filings (Section 8 and renewals) are required to keep the registration alive. |
| May 14, 2019 | SUNA | NOTICE OF ACCEPTANCE OF STATEMENT OF USE E-MAILED | — |
| May 13, 2019 | CNPR | ALLOWED PRINCIPAL REGISTER - SOU ACCEPTED | — |
| Mar 28, 2019 | SUPC | STATEMENT OF USE PROCESSING COMPLETE | — |
| Mar 28, 2019 | AITU | CASE ASSIGNED TO INTENT TO USE PARALEGAL | — |
| Mar 12, 2019 | IUAF | USE AMENDMENT FILED | — |
| Mar 12, 2019 | EISU | TEAS STATEMENT OF USE RECEIVED | The applicant filed a Statement of Use with specimens showing the mark in actual commerce. The USPTO will review the filing for compliance. If accepted, the mark can proceed to registration; if deficient, the USPTO may issue a requirement or office action. |
| Oct 23, 2018 | NOAM | NOA E-MAILED - SOU REQUIRED FROM APPLICANT | A Notice of Allowance means your intent-to-use application cleared examination and opposition but is not registered yet. You must file a Statement of Use showing the mark in commerce, or request an extension, before the deadline — usually six months from the notice date. |
| Aug 28, 2018 | NPUB | OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED | — |
| Aug 28, 2018 | PUBO | PUBLISHED FOR OPPOSITION | Your mark was published in the USPTO Official Gazette for a 30-day opposition window. During that period, third parties who believe they would be harmed can file an opposition. If no opposition is filed, prosecution usually continues toward registration or a Notice of Allowance. |
| Aug 8, 2018 | NONP | NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED | — |
| Jul 19, 2018 | CNSA | APPROVED FOR PUB - PRINCIPAL REGISTER | — |
| Jul 12, 2018 | TEME | TEAS/EMAIL CORRESPONDENCE ENTERED | — |
| Jul 11, 2018 | CRFA | CORRESPONDENCE RECEIVED IN LAW OFFICE | — |
| Jul 11, 2018 | ERFR | TEAS REQUEST FOR RECONSIDERATION RECEIVED | — |
| Jul 5, 2018 | GNFN | NOTIFICATION OF FINAL REFUSAL EMAILED | — |
| Jul 5, 2018 | GNFR | FINAL REFUSAL E-MAILED | A final Office Action (final refusal) means the examining attorney is maintaining at least one refusal and your options are narrower. You can file a response addressing the refusal, appeal to the Trademark Trial and Appeal Board, or let the application abandon. |
| Jul 5, 2018 | CNFR | FINAL REFUSAL WRITTEN | A final Office Action (final refusal) means the examining attorney is maintaining at least one refusal and your options are narrower. You can file a response addressing the refusal, appeal to the Trademark Trial and Appeal Board, or let the application abandon. |
| May 7, 2018 | TEME | TEAS/EMAIL CORRESPONDENCE ENTERED | — |
| May 4, 2018 | CRFA | CORRESPONDENCE RECEIVED IN LAW OFFICE | — |
| May 4, 2018 | TROA | TEAS RESPONSE TO OFFICE ACTION RECEIVED | This event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action. |
| Apr 26, 2018 | GNRN | NOTIFICATION OF NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Apr 26, 2018 | GNRT | NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Apr 26, 2018 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Apr 12, 2018 | DOCK | ASSIGNED TO EXAMINER | — |
| Jan 31, 2018 | MDSM | NOTICE OF DESIGN SEARCH CODE E-MAILED | — |
| Jan 30, 2018 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| Jan 22, 2018 | NWAP | NEW APPLICATION ENTERED | — |