Drawing for CARBON UPCYCLING

USPTO serial 88110769

CARBON UPCYCLING

Reviewed by CopyMark Law Group

Filing date
Status date
Registration date
—
Examiner
NOVAKOVIC, MIROSLAV
Law office
TMEG LAW OFFICE 108 - EXAMINING ATTORNEY ASSIGNED

What this means

These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.

Status 602: These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances.

Need help with CARBON UPCYCLING?

If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.

Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.

Owner

Attorney of record

The USPTO lists this attorney as the applicant's representative for correspondence on this application.

Jessica Stone Levy

Jessica Stone Levy Sherman & Howard L.L.C.633 17th St., Suite 3000Denver, CO 80202UNITED STATES

Goods and services

ClassDescriptionStatusFirst use
001Chemical composites made with nanoparticles that were formed from the combination of greenhouse gases and graphite for improved mechanical, nucleation, and thermal properties; chemical coating additive made with nanoparticles that were formed from the combination of ceramics, greenhouse gases and graphite for fire retardation, corrosion protection, structural rehab, and waterproofing; thermosetting materials made with nanoparticles that were formed from the combination of greenhouse gases and graphite, namely, epoxies, thermoplastic polyurethane, and rubber composites; absorbents in the nature of absorbing carbons made with nanoparticles that were formed from the combination of greenhouse gases and graphite for air filtration, agriculture, petrochemicals and advanced material synthesis industries; chemical composites made with nanoparticles that were formed from the combination of greenhouse gases and fly ash for use in the construction, concrete, cement, mortar, and building material industries ; thermosetting materials made with nanoparticles that were formed from the combination of greenhouse gases and fly ash, for use in the construction, concrete, cement, mortar, and building material industries; absorbents in the nature of absorbing carbons made with nanoparticles that were formed from the combination of greenhouse gases and fly ash for use in the construction, concrete, cement, mortar, and building material industries; chemical adsorbents made with nanoparticles that were formed from the combination of greenhouse gases and fly ash for contaminant removal in petrochemical, water and wastewater, and advanced material industries; unprocessed chemical polymers made with nanoparticles that were formed from the combination of greenhouse gases and bottom ash being incinerator ash; unprocessed chemical polymers made with nanoparticles that were formed from the combination of greenhouse gases and petroleum coke; unprocessed chemical polymers made with nanoparticles that were formed from the combination of greenhouse gases and inorganic mineral based material; thermosetting materials made with nanoparticles that were formed from the combination of greenhouse gases and bottom ash being incinerator ash, namely, Polyethylene terephthalate (PET), polypropylene (PP), Polyamides, Polyhydroxyalkanoates (PHA), polyethylene (PE), and engineered plastics; thermosetting materials made with nanoparticles formed from the combination of greenhouse gases and petroleum coke, namely, such as epoxies, thermoplastic polyurethane, and rubber composites; thermosetting materials made with nanoparticles that were formed from the combination of greenhouse gases and inorganic mineral based material, namely epoxies, thermoplastic polyurethane, and rubber composites; absorbents in the nature of absorbing carbons made with nanoparticles that were formed from the combination of greenhouse gases and bottom ash being incinerator ash for use in air filtration, agriculture, petrochemicals and advanced material synthesis industries; absorbents in the nature of absorbing carbons made with nanoparticles that were formed from the combination of greenhouse gases and petroleum coke for use in air filtration, agriculture, petrochemicals and advanced material synthesis industries; absorbents in the nature of absorbing carbons made with nanoparticles that were formed from the combination of greenhouse gases and inorganic mineral based material for use in air filtration, agriculture, petrochemicals and advanced material synthesis industriesACTIVE—
040recycling of greenhouse gases in the nature of combining greenhouse gases with graphite to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used in chemical composites; recycling of greenhouse gases in the nature of combining greenhouse gases with graphite to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used as an additive to a coating; recycling of greenhouse gases in the nature of combining greenhouse gases with graphite to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used in industrial lubricants, used in strengthening concrete, used to increase electrical conductivity of plastics, used as an additive for thermosetting materials, used in electrically conductive ink, used as an additive to an adhesive, used for tertiary or enhanced oil recovery, used in transparent, flexible conductive film for displays and electrodes, used as adsorbents or absorbents, used to add durability to asphalt, used in producing membranes for air and water purification, used in the manufacturing of high-performance electronics and used in the creation of new pharmaceutical drugs; recycling of greenhouse gases in the nature of combining greenhouse gases with fly ash to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used in industrial lubricants, used in chemical polymers, used in strengthening concrete, used to increase electrical conductivity of plastics, used as an additive for thermosetting materials, used as an additive to a coating or adhesive, used in electrically conductive ink, used for tertiary or enhanced oil recovery, used in transparent, flexible conductive film for displays and electrodes, used as adsorbents or absorbents, used to add durability to asphalt, used in producing membranes for air and water purification, used in the manufacturing of high-performance electronics and used in the creation of new pharmaceutical drugs; recycling of greenhouse gases in the nature of combining greenhouse gases with bottom ash being incinerator ash to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used in industrial lubricants, used in chemical polymers, used in strengthening concrete, used to increase electrical conductivity of plastics, used as an additive for thermosetting materials, used as an additive to a coating or adhesive, used in electrically conductive ink, used for tertiary or enhanced oil recovery, used in transparent, flexible conductive film for displays and electrodes, used as adsorbents or absorbents, used to add durability to asphalt, used in producing membranes for air and water purification, used in the manufacturing of high-performance electronics and used in the creation of new pharmaceutical drugs; recycling of greenhouse gases in the nature of combining greenhouse gases with petroleum coke to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used in industrial lubricants, used in chemical polymers, used in strengthening concrete, used to increase electrical conductivity of plastics, used as an additive for thermosetting materials, used as an additive to a coating or adhesive, used in electrically conductive ink, used for tertiary or enhanced oil recovery, used in transparent, flexible conductive film for displays and electrodes, used as adsorbents or absorbents, used to add durability to asphalt, used in producing membranes for air and water purification, used in the manufacturing of high-performance electronics and used in the creation of new pharmaceutical drugs; recycling of greenhouse gases in the nature of combining greenhouse gases with mineral-based material comprising inorganic materials, namely, oxides and silicates, olivine, talc, yellowstone, serpentine, saw dust and amorphous powder to create nanoparticles for industrial and research applications, namely, where the nanoparticles are used in industrial lubricants, used in chemical polymers, used in strengthening concrete, used to increase electrical conductivity of plastics, used as an additive for thermosetting materials, used as an additive to a coating or adhesive, used in electrically conductive ink, used for tertiary or enhanced oil recovery, used in transparent, flexible conductive film for displays and electrodes, used as adsorbents or absorbents, used to add durability to asphalt, used in producing membranes for air and water purification, used in the manufacturing of high-performance electronics and used in the creation of new pharmaceutical drugsACTIVE—

Related trademarks

CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.

Prosecution history

Latest event (MAB2): The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time.

DateCodeEventWhat it means
Aug 20, 2020MAB2ABANDONMENT NOTICE E-MAILED - FAILURE TO RESPONDThe trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time.
Aug 20, 2020ABN2ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSEThe trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time.
Feb 7, 2020GNS2NOTIFICATION OF INQUIRY AS TO SUSPENSION E-MAILED—
Feb 7, 2020GNSIINQUIRY TO SUSPENSION E-MAILED—
Feb 7, 2020CNSISUSPENSION INQUIRY WRITTEN—
Aug 8, 2019ARAAATTORNEY/DOM.REP.REVOKED AND/OR APPOINTEDThis event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action.
Aug 8, 2019REAPTEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED—
Aug 7, 2019GNS3NOTIFICATION OF LETTER OF SUSPENSION E-MAILED—
Aug 7, 2019GNSLLETTER OF SUSPENSION E-MAILED—
Aug 7, 2019CNSLSUSPENSION LETTER WRITTEN—
Jul 16, 2019TEMETEAS/EMAIL CORRESPONDENCE ENTERED—
Jul 16, 2019CRFACORRESPONDENCE RECEIVED IN LAW OFFICE—
Jul 14, 2019ALIEASSIGNED TO LIE—
Jul 9, 2019TROATEAS RESPONSE TO OFFICE ACTION RECEIVEDThis event means the applicant filed a response to a USPTO Office Action — typically arguments, amendments, or evidence addressing the examiner's objections. The USPTO will review the response and either allow the mark to proceed or issue another action.
Jan 9, 2019GNRNNOTIFICATION OF NON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Jan 9, 2019GNRTNON-FINAL ACTION E-MAILEDA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Jan 9, 2019CNRTNON-FINAL ACTION WRITTENA non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application.
Dec 19, 2018DOCKASSIGNED TO EXAMINER—
Sep 18, 2018NWOSNEW APPLICATION OFFICE SUPPLIED DATA ENTERED—
Sep 13, 2018NWAPNEW APPLICATION ENTERED—

Frequently asked questions

Related guidance