USPTO serial 88421707
JOHN AND GOOG'S IMPROVEMENT ADDITIVES
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- —
- Examiner
- ATTANG, UDEME U
- Law office
- TMO LAW OFFICE 115 - EXAMINING ATTORNEY ASSIGNED
What this means
These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.
Need help with JOHN AND GOOG'S IMPROVEMENT ADDITIVES?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.
Owner
Carle Place Long Island, NY
Goods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 037 | These are additives that I feel are important to be implemented in the present garbage compactor's that are being used today. These additives would be implemented to improve the garbage compactor's of today. Possibly in the use of most compactor's used in all business's retail outfits, stores or where ever need be. It could be for major grocery stores. The additives that I want Trademarked once implemented will help and bring and add more efficiency to these garbage compactor's already on the market and are being used today.No. 1 An added identical horizontal plate implemented and engaged with the proper separation distance one from the other These now two horizontal plates will slide and project out with force with the use of a compressor motor . These two flat metal horizontal plates will come out from underneath the compacter base and simultaneously or separately one 1st to full extension then when the other 1st one goes back in the other flat horizontal metal plane will come out and go to maximum extension subsequently crushing more and more garbage. Another words both plates of steel plates approximately 2 feet by 2 feet always leave room for dimensional change) will alternately or simultaneously will slide out of the lower part of the garbage compacter pushing garbage back into the front of the dumpster.No. 2 Also you will have a flat piece of geometrically square metal approximately 2 -3 feet by approximately 3 feet that at timeswhen decided will be engaged and standing upright in the vertical position used to push all the garbage back further back into the dumpster.This vertical piece will lie above the dumpster and slide into its vertical track when necessary to condense the garbage already in sitting in the dumpsterThis flat metal piece will be affixed to the inside or the outside of the garbage compacter. In both case it will be readily available to be placedor slide into three slots that are affixed to three separate tracks that have mobility to journey the metal geometrical square backwards in the dumpster. You haveto picture this the width and the height of inside the dumpster and realize that this geometrical somewhat square to somewhat rectangular piece of vertical upright flatsteel after it slides into the two or three inserts two of which are on each wall of the dumpster one to the right and one to the left connected to mobile tracks and the otherinsert the third which is at the base of the dumpster also on a mobile track will carry forcefully this steel vertical upright steel wall and will push this flatsteel vertical piece backwards subsequently pushing all the garbage in the dumpster back as far as it will go in the interior of the dumpster itself. This will be exceptionalhelp and will prevent all the unnecessary garbage back up and the clogging up the opening of the cylinder and the entrance of the cylinder that connects to the dumpster.So to summarize you have a steel piece of metal square to some degree that will mechanically lift up right off the top of the dumpster or lift up and mechanicallyand slide right into the inserts. It possibly could be manually done. It will be positioned this steel piece outside the garbage compacter or be a part of the compacteritself and will be for ready for easy access and be mobilized after it is placed into the inserts by activating the mobility button for the tracks the vertical steel wallsits in to compact the garbage backwards.No 2 will be optional for who wants to use this compressing wall to condense garbage in the containerNo. 3 Also a steel or strong alloyed plate will be implemented at the mouth of the compacter. It is this plate when there are garbage back-ups in the troughor compacter shaft that will be used and implemented and engaged. This plate will crush and condense the garbage in the compactor's shaft and keepcompacting and compressing the garbage in the shaft until all the garbage that has been thrown into the mouth of the compactor falls into the compactor'sdrop box. No 3 is always a help and if essential No. 2 is not implemented into the compactor's of today which is an option then No. 3 is very importantand very useful to the process of compacting garbage and clearing the shaft of the garbage backed up in it.This will help in compacting garbage .These innovative plates will enhanced and perfect compacting garbage in these garbage compactor that have alreadybeen manufactured and are used today in the current world.The compactors themselves that are on the market and being used today we do not want any credit for.The additives mentioned these plates that are the additives and their operation that could be used in present day compactors to help compact garbageis what i want trademarked | ACTIVE | — |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Feb 3, 2020 | MAB2 | ABANDONMENT NOTICE E-MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Feb 3, 2020 | ABN2 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Jul 23, 2019 | GNRN | NOTIFICATION OF NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jul 23, 2019 | GNRT | NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jul 23, 2019 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jul 15, 2019 | DOCK | ASSIGNED TO EXAMINER | — |
| May 23, 2019 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| May 11, 2019 | NWAP | NEW APPLICATION ENTERED | — |