USPTO serial 97747688
ALTRA
Reviewed by CopyMark Law Group
- Filing date
- Status date
- Registration date
- —
- Examiner
- DIBLE, JONATHON I
- Law office
- TMO LAW OFFICE 111 - EXAMINING ATTORNEY ASSIGNED
What this means
These status codes mean the trademark application is abandoned and no longer pending. Common reasons include missing an Office Action response (600), filing without a valid basis (602), express abandonment by the applicant (604), or failure to respond to an examiner's inquiry (618). Revival may be possible in limited circumstances. If abandonment was unintentional, consult counsel about a petition to revive. Otherwise file a new application if protection is still needed.
Need help with ALTRA?
If you own this trademark, we can monitor new filings and help with USPTO deadlines. If you do not, we can file a new U.S. application.
Current trademark owner
Monitor this mark, or talk with CopyMark about this registration.
Not the owner?
File a new U.S. trademark application, or speak with our attorneys.
Owner
Attorney of record
The USPTO lists this attorney as the applicant's representative for correspondence on this application.
William F. Kolakowski III
WILLIAM F. KOLAKOWSKI III REISING ETHINGTON P.C.755 WEST BIG BEAVER ROAD, SUITE 1850TROY, MI 48084UNITED STATESGoods and services
| Class | Description | Status | First use |
|---|---|---|---|
| 007 | machine coupling and transmission components, other than for land vehicles, namely, clutches, freewheels, brakes, torque limiters, transmissions, shaft couplings, machine couplings, universal joints, constant velocity joints, angle ball joints, gear reducers, gearheads, gearboxes, linear actuators, linear guides, worm gear jacks, screw jacks, lifting columns, linear motion machines for moving objects, shaft locking devices and shear-pin devices; machine parts, namely, friction, brake, approach and pressure discs, brake linings, pistons, diaphragms, rollers, shafts, hubs, keys, spindles, axles, rails, connecting rods, collars, clevises, engine housings, housing spacers, housing adapters, mounting plates, bearings, bushings, gears, worm shafts, sprocket wheels, pulleys, chains, chain drives, and belts, profile rails and guideways, round rails and guideways, shaft support blocks, rail support blocks, bearing support blocks, pillow blocks, lead screws, lead screw nuts, ball screws, ball screw nuts, ball splines, linear motion tables, carriages, positioning slides, valves, sheaves, and hydraulic or pneumatic connection elements between fixed and rotating parts for conducting a pressure medium; motors, other than for land vehicles, namely, gear motors, drum motors, air motors, electric motors, servo motors, AC synchronous motors, direct drive linear motors, direct drive rotary motors, brush DC motors, brushless DC motors, stepper motors; drives for electric motors; generators; hydraulic power units; cooling systems for wind turbine generators and converters; machine tools, namely, metalworking tools for forming grooves in brake discs and for resurfacing brake discs, lifting tools for installation and removal of yaw brakes and tools for removing pistons from yaw brakes | ACTIVE | — |
| 009 | motor and motion controllers; electric motor drives and controllers; electric brake controllers; electric clutch controllers; electric and electronic controllers for linear actuators and positioning devices; machine controllers; precision positioning devices; electronic control systems for vehicles; electronic control systems for automated (driverless) guided vehicles; computer software for machine control and motion control; computer software for controlling electric motors; computer software for drives used in controlling electric motors; computer software for design, testing and modification of motion algorithms and synchronization of system processes and devices such as controllers, drives, motors and I/O devices used in automated systems; computer software for motion control of robotic systems; data network hardware and computer software for use in synchronizing operation of motor control elements; computer network routers; power supplies; digital amplifiers; frequency converters; rectifiers; power surge protection equipment, circuit breaking apparatus; pulse generators; resistors, contactors, inductors and transformers; capacitor modules; electrical cables; filters for electromagnetic and radio-frequency interference; electrical resolvers; electrical synchros; electric coils and holders for electric coils; sensors, namely, magnetic, inductive, capacitive, photo-electric, rotary, load-cell, and ultrasonic sensors; electric and electromechanical switches, namely, limit switches; touch switches, button switches, foot switches, cable pull switches, magnetic switches and interlock switches | ACTIVE | — |
| 012 | machine coupling and transmission components for vehicles, namely, clutches, freewheels, brakes, torque limiters, shaft couplings, universal joints, constant velocity joints, gear reducers, gearheads, gearboxes, linear actuators, friction, brake, approach and pressure discs, brake linings, bearings, bushings, gears, chains, sheaves, hydraulic or pneumatic connection elements between fixed and rotating parts for conducting a pressure medium; motors; gear motors; air motors; electric motors; servo motors; AC synchronous motors; automated (driverless) guided vehicles | ACTIVE | — |
| 042 | Design, engineering, research and development services for machine coupling and transmission components, other than for land vehicles, namely, clutches, freewheels, brakes, torque limiters, transmissions, shaft couplings, machine couplings, universal joints, constant velocity joints, angle ball joints, gear reducers, gearheads, gearboxes, linear actuators, linear guides, worm gear jacks, screw jacks, lifting columns, linear motion machines for moving objects, shaft locking devices and shear-pin devices; design, engineering, research and development services for machine parts, namely, friction, brake, approach and pressure discs, brake linings, pistons, diaphragms, rollers, shafts, hubs, keys, spindles, axles, rails, connecting rods, collars, clevises, engine housings, housing spacers, housing adapters, mounting plates, bearings, bushings, gears, worm shafts, sprocket wheels, pulleys, chains, chain drives, and belts, profile rails and guideways, round rails and guideways, shaft support blocks, rail support blocks, bearing support blocks, pillow blocks, lead screws, lead screw nuts, ball screws, ball screw nuts, ball splines, linear motion tables, carriages, positioning slides, valves, sheaves, and hydraulic or pneumatic connection elements between fixed and rotating parts for conducting a pressure medium; design, engineering, research and development services for motors, other than for land vehicles, namely, gear motors, drum motors, air motors, electric motors, servo motors, AC synchronous motors, direct drive linear motors, direct drive rotary motors, brush DC motors, brushless DC motors, and stepper motors; design, engineering, research and development services for drives for electric motors, generators, hydraulic power units and cooling systems for wind turbine generators and converters; design, engineering, research and development services for machine tools, namely, metalworking tools for forming grooves in brake discs and for resurfacing brake discs, lifting tools for installation and removal of yaw brakes and tools for removing pistons from yaw brakes; design, engineering, research and development services for motor and motion controllers, electric motor drives and controllers, electric brake controllers, electric clutch controllers, electric and electronic controllers for linear actuators and positioning devices, machine controllers, precision positioning devices, electronic control systems for vehicles, electronic control systems for automated (driverless) guided vehicles, computer software for machine control and motion control, computer software for controlling electric motors, computer software for drives used in controlling electric motors, computer software for design, testing and modification of motion algorithms and synchronization of system processes and devices such as controllers, drives, motors and I/O devices used in automated systems, computer software for motion control of robotic systems, data network hardware and computer software for use in synchronizing operation of motor control elements, computer network routers, power supplies, digital amplifiers, frequency converters, rectifiers, power surge protection equipment, circuit breaking apparatus, pulse generators, resistors, contactors, inductors, transformers, capacitor modules, electrical cables, filters for electromagnetic and radiofrequency interference, electrical resolvers, electrical synchros, electric coils, and holders for electric coils; design, engineering, research and development services for sensors, namely, magnetic, inductive, capacitive, photo-electric, rotary, load-cell, and ultrasonic sensors; design, engineering, research and development services for electric and electromechanical switches, namely, limit switches; touch switches, button switches, foot switches, cable pull switches, magnetic switches and interlock switches; design, engineering, research and development services for machine coupling and transmission components for vehicles, namely, clutches, freewheels, brakes, torque limiters, shaft couplings, universal joints, constant velocity joints, gear reducers, gearheads, gearboxes, linear actuators, friction, brake, approach and pressure discs, brake linings, bearings, bushings, gears, chains, sheaves, and hydraulic or pneumatic connection elements between fixed and rotating parts for conducting a pressure medium; design, engineering, research and development services for motors for vehicles, namely, gear motors; air motors; electric motors; servo motors; and AC synchronous motors; design, engineering, research and development services for automated (driverless) guided vehicles | ACTIVE | Apr 20, 2007 |
Related trademarks
CopyMark links this record to cited §2(d) serials, the owner's other marks, Nice classes, similar mark names, and recently changed USPTO applications.
- Other trademarks owned by Altra Industrial Motion Corp.
- Other trademarks in Class 007
- Other trademarks in Class 009
- Other trademarks in Class 012
- Other trademarks in Class 042
- Similar marks named ALTRA
- Prosecution event MAB2 explained
- Recently changed USPTO trademarks
- Recently filed trademarks
- Browse all trademark records
Prosecution history
| Date | Code | Event | What it means |
|---|---|---|---|
| Oct 2, 2023 | MAB2 | ABANDONMENT NOTICE E-MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Oct 1, 2023 | MAB2 | ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Oct 1, 2023 | ABN2 | ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | The trademark application was abandoned because a required response or document was not filed by the deadline — usually a missed Office Action response. The application is dead unless a petition to revive is granted within a limited time. |
| Jun 15, 2023 | GNRN | NOTIFICATION OF NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jun 15, 2023 | GNRT | NON-FINAL ACTION E-MAILED | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| Jun 15, 2023 | CNRT | NON-FINAL ACTION WRITTEN | A non-final Office Action means the USPTO examining attorney has raised at least one issue with your trademark application but has not made a final decision. You usually have three months to respond with arguments, amendments, or evidence. Missing the deadline can abandon the application. |
| May 22, 2023 | DOCK | ASSIGNED TO EXAMINER | — |
| Jan 31, 2023 | NWOS | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED | — |
| Jan 13, 2023 | NWAP | NEW APPLICATION ENTERED | — |